Using dynmap

[Vehicledestroyer]

I'm having an issue with dynmap. I installed v0.30.1 for CB 1.1. When I go to my IP plus the dynmap port which is 10.10.10.1:8123 for example the connection times out, it won't load. I've looked through the config files and read dynmaps github and it's very straight forward and out of the box set up. What can I do to get it to work?

[Thijsbeer]

I have the same issue.
Tried the 0.31 that worked for 1 day.
After that same problem. No connection via browser
I have no problems on my test server at home.
People from outside can reach the dynmap without any problems.

Could someone from Fragnet post here if they are looking in to this?

[Daniel|Fragnet]

We are looking into this...
Both 0.30 and 0.31 seems to have issues once we have tested them.
We still have DynMap 0.29 pre-installed, while we validate the newer versions.

[Thijsbeer]

Ok, I found out that if you put in 0.0.0.0 instead of your server ip, it works.

/dynmap/configuration.txt
# The network-interface the webserver will bind to (0.0.0.0 for all interfaces, 127.0.0.1 for only local access).
webserver-bindaddress: 0.0.0.0

try http://mc.dutchmines.nl:25566/

edit: running 0.31

[Thijsbeer]

Or the good people of Fragnet found out what the problem was?